PetSafe Deluxe Comfort Fit Little Dog Fence

	PetSafe Deluxe Comfort Fit Little Dog Fence Kit Featuring the  Deluxe Comfort Fit Little Dog Receiver 45% smaller than other fence receivers.
Kit Includes
Transmitter with AC adapter Comfort Fit Little Dog Receiver with 5 correction levels Installation and Training Manual with Video CD Wire & Boundary Flags per the following chart

The PetSafe Deluxe Comfort Fit Little Dog Fence Receiver is a break through for owners of small pets.  In the past, many small dog owners did not think their dog could wear a dog fence receiver.  That time has past thanks to the PetSafe Deluxe Comfort Fit Little Dog Fence Receiver; now even the smallest of dogs and their owners can enjoy the freedom of a PetSafe Deluxe Comfort Fit Little Dog Fence.  The PetSafe Comfort Fit Deluxe Little Dog Receiver is 45% smaller then other receivers.

• QuickFit Buckle: Provides a quick release and a perfect fit every time.
• Five Levels of Programmable Correction
  • Level one is warning tone only - ideal for initial training or very timid pets
  • Levels two thru four are for easy or average to train pets
  • Level five is for very hard to train or stubborn pets
  • Levels are easily changed with a push of a button on the receiver
• Testing Tool: Allows you to test the proper operation of the receiver
• Low Battery Indicator Light: Lets you know when the batteries need replacing. The #1 cause of pets leaving a containment system are weak or dead batteries 
• ASIC Microchip: A chip the size of a match head with 3000+ filters to prevent unwanted correction.
• Small & Lightweight Receiver: The Deluxe Comfort Fit Receiver is the smallest and lightest receiver available anywhere - weighs only 1.1 ounces - 45% smaller than other receivers! 
• Waterproof Receiver: The Deluxe Comfort Fit Receiver is completely waterproof
• Omni-Directional Signal: A must for all containment systems as it eliminates all dead signal areas. This prevents your pet from finding a way out. 
• Operates Multiple Collars: This system was designed to operate as many collars and contain as many dogs as you desire.
• Adjustable Correction Zone: Allowing you to set the correction field from a few feet all the way up to 20 feet.  
• Yard Size: Ideal for any size yard up to 25 acres
• Rising Stimulus: If your dog does not back up from challenging the fence the stimulus will rise automatically
• Wire Break Alarm: Audio break alarm and light on the transmitter warns you if the wire has been broken 
• Digitally Coded Signal:  Prevents false activation. Only our transmitter can activate the receiver. Other brands' receivers can be activated by Televisions, cordless phones, garage door openers, etc. We use filters and coded signals to prevent this. Don't trust your pet's safety to anything but a PetSafe™ Containment System
• Receiver Fail-Safe: If your pet gets trapped in the correction zone, the receiver will shut down after 20 seconds to prevent over correction
• Transmitter cover: Conceals range adjustment control to prevent tampering and accidental increases or decreases in signal
• Built-in lightning and surge protection for storm-prone areas: Your system is covered under warranty against lightning or surge damage
• Government Ratings: The only UL and CE rated system on the market 
• Instructions: Easy-to-follow manual and DVD covering installation and pet training. Watch the 16 minute training video by clicking here (Requires Windows Media Player)
• The boundary wire is 20 gauge, stranded direct burial wire and is designed to last a lifetime. Optional 20 gauge, solid core wire is available as an upgrade. Use the guidelines below to determine the amount of wire needed to enclose your property.

The transmitter plugs into a standard outlet and emits a radio signal that travels along an underground wire. You can adjust the signal to up to 15 feet from the wire. In most cases, a 4-6 foot signal field will be the best for optimal training. The lightweight receiver worn on your pet's collar picks up the radio signal and alerts him as he nears the underground boundary that you have customized for your yard. When he approaches the boundary, he receives a warning beep. If your dog does not return, he receives a static correction which is startling but not harmful. Our maintenance free design and ease of installation offers tremendous savings compared to conventional fencing and other systems of this type.

PetSafe makes it easy to train your pet. By spending just 15 minutes a day working with your pet, he can be fully trained in a few days. You can train as many dogs as you want on the same system, as long as they are each wearing a receiver collar. Additional receivers are available if you have more than one dog.

When doing any of the "Double Loop" installations, the wires must be separated by at least three feet. A Double Loop is necessary only when enclosing less than all four sides of the property. This is required in these situations so the wire can make a continuous loop.

A common misconception about "Underground Fencing" is that it needs to be buried "Underground". This unfortunate but understandable misconception often scares many people away from enjoying the freedom that these fences provide both you and your pet.
There is no need to spend a weekend burying the wire underground, or paying someone else hundreds of dollars to do it for you. You can install it yourself above ground in only a matter of an hour or two.

Using 6 inchwire pegs (pictured to the left) you can "staple" the wire to the ground. Within a matter of 7 - 14 days the root system of your lawn will grow over the wire and hide it completely from view, essentially "Burying" it into the lawn. Not only does this make the installation of your new pet containment systems hassle free, it also eliminates any potential loss of signal that may result from burying the boundary wire under several inches of dirt, not to mention the backaches and blisters it will save you.

Step 1

1. First run your twisted wire from your transmitter out to the beginning of your boundary.
   
2. Now "Staple" the twisted wire to the ground by hammering in a wire "Staple" every 5 - 6 feet.
   
3. Now stop and look at the wire. Is it completely flush to the ground all the way to the start of the boundary? If not go and "Staple" any raised areas before proceeding to the next step. The wire MUST completely touch the ground.

Step 2

1. Next, place a "Staple" where the twisted wire and the beginning of the boundary meet (if you have a splice in this area please dig a small hole about 2 inches deep and bury the splice. Then place a "Staple" in the front of and behind the splice to relieve any pressure on the splice)
   
2. Now walk the wire to the first corner of your boundary and "Staple" it to the ground. Repeat this step for all four corners of your boundary.
   
3. Next go back just as you did with your twisted wire and "Staple" any raised areas down until they are completely flush with the ground.

You are now done! It is that simple.

You have no need to worry about people tripping over the wire because it is completely flush to the ground and will be completely hidden within 7-10 days. You also do not need to worry about your lawnmower cutting the wire as the blades will never get anywhere near the wire. Nobody cuts their lawns to shorter than an inch, with the vast majority of people keeping them at 2" - 3" inches, the wire is flush to the ground and cannot be cut.

There are a couple of instances where burying the wire is preferable.

1. If you are putting a fence into a pasture area where livestock such as horses or cattle will frequent, then you will want to bury the wire as their hooves will create breaks. In this case you will want the wire at least 8 - 10 inches underground.
   
2. If you frequently have your yard aerated you will want the wire at least 5 - 6 inches in the ground. Although if you do an above ground installation you can simply avoid the exterior boundaries when performing the aeration.

Please Note
These instructions will not be included with your fence.

How Much Wire Do I Need?

Use the follows chart to determine how much wire you need to enclose your yard. These figures are estimates, based on typical layouts. You may need more wire if you're doing interior loops to boundary off gardens, swimming pools or other protected areas.

To Cover This Size Area	You Need This Amount of Wire
1/4 Acre	500 Feet
1/2 Acre	600 Feet
1 Acre	1000 Feet
2 Acres	1300 Feet
3 Acres	1500 Feet
4 Acres	1800 Feet
5 Acres	2000 Feet

For larger areas, use the following formula:

• Multiply the total acreage by 43,000 (example, 10 acres x 43,000 = 430,000).
• Find the square root of the above number (square root of 430,000 = 656 ). This is the length of each side of a 10 acre area that is square in shape.
• Multiply the square root by four (656 x 4 = 2,624). Therefore, one would need approximately 2,624 feet of wire to enclose the perimeter of a 10 acre area. Even if your area is not square, if you multiply the square root by four, this is the approximate length of the four sides of your acreage.
• Note - You will need additional wire to run from the transmitter to the perimeter and/or for any interior loops.

Stranded or Solid Core Wire?

All fence kits ship with PetSafe's standard 20 gauge stranded wire. However, you may choose to upgrade your kit to 20 gauge solid core wire. The optional solid core wire has thicker insulation and is more resistant to corrosion.

---

PetSafe A Name You Can Trust More people buy PetSafe pet training products than any other brand! PetSafe products are

• On the cutting edge of technology - PetSafe will invest over $4.5 million on Research and Development this year alone plus an additional $2 million on a 20,000 square foot state-of-the-art pet training and behavior center. Nobody knows more about pets or pet training than PetSafe!
• Superior in quality (all PetSafe products are manufactured in ISO9002 certified factories).
• Only PetSafe pet containment systems are FCC, UL AND CE rated. No other company has been able to qualify for all three of these ratings.
• Toll Free Customer Care Center (1-800-732-2677). Hours of operation are Monday through Friday 8 AM - 8 PM EST and Saturday 9 AM - 5 PM.